Back entrance door

Back entrance door

When designing a house, there is a significant focus on uniform appearance. This is why details such as basement doors, laundry room doors, garage entrance doors etc. must not be forgotten as they are also part of the overall design.

Get an estimate

– Elegant, maintenance-free and rot proof!

Magnor’s back entrance doors can be adapted to harmonise with all the extra entrance doors for the house, with a design that suits the rest of the building.

Decide whether you want an entire door of safety glass or a combination of glass and panelling.  Our doors are maintenance-free, and the panelling is an insulated, aluminium sandwich structure that is protected from rot or fungi – normally a major problem with traditional back entrance doors with wood/plywood panelling.

If you choose a back door from Magnor, you can avoid a whole load of problems in the future.

Specifications

Aluminium

  • Alloy: 6060 / 6063
  • Nature anodised finish or pure white (RAL 9010) on the visible exterior – other colours available on request.
  • Colours: RAL or NCS colours
  • Do NOT clean the aluminium with chlorinated detergents as this may cause corrosion of cut surfaces

Wood

  • Deep-impregnated wood
  • Frame profiles in solid pine or laminated with finger jointing
  • Our sash profiles are supplied as standard in laminated pine/spruce

Glass

  • A full range of functional glass
  • NB! Glass requires pressure equalisation if fitted in a building located higher than 750 metres above sea level

U-value

  • U-value ranging from 0.70 W/m2K, depending on the type of glass

Weather stripping

  • Q-Lon seal between frame and sash (removable)
  • EPDM rubber seal as glazing gasket

Fittings

  • Lifting hinges in galvanised steel

Espagnolette

  • The espagnolettes are supplied in zinc-coated steel with an extra layer of glossy chrome

Handles

  • Handles supplied as standard in matte natural aluminium. Also available in other finishes
  • Standard with exterior hole cover and interior cylinder
  • Can also be supplied with exterior lock cylinder

Other information

  • Also available as double doors
  • Available with wheelchair-friendly threshold in oak/aluminium (25 mm)
  • Frame depths of 95 mm and 128 mm (excl. 5 mm groove for fittings)
  • Increased frame depth can be provided on request
  • The doors are provided as standard with groove
  • Pre-drilling 14/4 mm as standard or ready with Adjufix frame sleeves
  • Groove and pre-drilling can be customised on request

    Get an offer

    Tell us a little about your needs, and we will help you find the best solution.



    Sturle Sørstrønen

    Sturle Sørstrønen
    Sales Director

    +47 907 23 207
    sts@hvm.no
    Tor Andrè Aspenes

    Tor Andrè Aspenes
    Regional Director

    +47 928 32 113
    ta@hvm.no