Fire safety window

Magnor Fire safety window
- more freedom of choice in densely built areas!

Certain types of wall structure require fire safety windows to gain approval for the building. This applies, for example, in areas where buildings are erected closer together than normal, and where windows and natural light are preferable to walls.

Magnor fire safety windows – inwards opening or fixed frame

Magnor fire safety windows AT 425 have a fire-safety classified frame with maintenance-free aluminium on the exterior in the same style and colour as the other Magnor windows installed in the building. The glass is also fire-safety classified and has EPDM rubber seals. Magnor Fire safety windows have been tested and approved in fire safety class E130 (B30).

With Magnor fire safety windows, you get more light into your rooms rather than a whole wall. As our fire safety windows open inwards, you also gain an extra evacuation route if a fire were to start in your house. Rooms with fire safety windows will also be approved as bedrooms.

 

Get an estimate

I visse veggkonstruksjoner kreves brannvindu for at bygget skal kunne godkjennes. Dette gjelder bl.a. der hus skal ligge tettere enn normalt og hvor man ønsker vindu og lys fremfor tett vegg.

Fastkarm

Magnor Brannvindu AT 425 er en brannklassifisert karm med utvendig vedlikeholdsfri aluminium og innvendig ferdig impregnert, malt trekledning. Glasspakning i EPDM-gummi og brannklassifisert glass.

Innadslående

Magnor Innadslående Brannvindu er et brannklassifisert drei/vipp vindu med utvendig vedlikeholdsfri aluminium og innvendig ferdig impregnert, malt trekledning. Glasspakning i EPDM-gummi og brannklassifisert glass.

Magnor Brannvindu er testet og godkjent i brannklasse EI30 (B30).

Be om tilbud HER

Aluminium

  • Alloy: 6060 / 6063
  • Nature anodised finish or pure white (RAL 9010) on the visible exterior – other colours available on order.
  • Colours: RAL or NCS colours
  • Do NOT clean the aluminium with chlorinated detergents as this may cause corrosion of cut surfaces

Wood

  • Deep-impregnated wood
  • Frame profiles in solid pine or laminated with finger jointing
  • Our sash profiles are supplied as standard in laminated pine/spruce

Glass

  • Only with fire-retardant glass
  • NB! Glass requires pressure equalisation if fitted in a building located higher than 750 metres above sea level

U-value

  • U-value ranging from 1.1 W/m2K, depending on the type of glass

Weather stripping

  • Q-Lon seal between frame and sash (removable)
  • EPDM rubber seal as glazing gasket

Fittings

  • Lifting hinges in galvanised steel

Espagnolette

  • The espagnolettes are supplied in zinc-coated steel with an extra layer of glossy chrome

Handles

  • Handles supplied as standard in matte natural aluminium. Also available in other finishes
  • Standard with interior turn-knob and exterior hole cover
  • Can also be supplied with lock cylinder

Ventilation

  • As standard, the patio doors come with door brake and allow for variable ventilation options up to 90 degrees

Other information

  • Also available as double doors
  • Available with wheelchair-friendly threshold in oak/aluminium (25 mm)
  • Frame depths of 95 mm and 128 mm (excl. 5 mm groove for fittings)
  • Increased frame depth can be provided on request
  • The doors are provided as standard with groove
  • Pre-drilling 14/4 mm as standard or ready with Adjufix frame sleeves
  • Groove and pre-drilling can be customised on request